The GNSB series centrifugal pumps offers a broad selection of innovative centrifugal pumps for a variety of routine,demanding,abrasive and corrosive applications.these pumps are designed for a wide range of flow rates,from a few gallons to hundreds of gallons per minute. GNSB series Centrifugal pump is used for transferring drillling mud. it can be used as feeding pump for desander,desilter,or used as mixing pump for Jet Mud Mixer, Also it can be used as trip pump and supercharging pumnp for rig mud pump.
Common applications include:
(1) Barite,ferric oxide and mineral oil
(2)base drilling muds
(3)Glass fibers
(4)Lime slurries
(5)Kaolin clay
(6)Crystalline forms
Typical configurations
3×2×13 6×5×14
4×3×13 8×6×11
5×4×11 10×8×14
The GNSB centrifugal pump is built to deliver superior fluid handing performance in a variety of applications.it's performance incorporates the power,durability and ease of maintenance of the field proven GNSB with a new high strength material in critical componet areas.all GNSB centrifugal pumps use tungsten carbide mechanical seal.with famous brand Bearing.A chromium alloyed iron provides greater wear resistance and higher strength in the casing,stuffing box,and impeller.The spare parts of GNSB centrifugal pump are interchangebale with most of the international Brand pump. such as Magnum. which helps customer to source spare parts easily.open impeller design that lowers axial thrust loads and is equipped with an anti-loosening impeller lock bolt to ensure the pump is not damaged if run in reverse.
