GN Mud Agitator is a compact unit that widely used for maintaining a drilling/workover fluid of uniform consistency throughout the surface mud system.GN Mud Agitator takes advantage of the high efficiency (92%) gear reducer to rotate the impeller at 60RPM or 72RPM ,depending on the input power.The resulting flow pattern maintains an optimum Turnover rate(TOR).The TOR is defined as the numbers of seconds required for the impeller to pump the full mud volume within the sizing area. TOR should be in the range of 40 to 90 Seconds for all sizing areas.
GN as a top mud agitator manufacturer in China.Our mud agitator is available in all horsepower and impeller types and sizes required to meet the customer's needs.
To ensure safe operation and avoild problems. Operation personnel should maintain it as per manual.
Routine Maintenance:
Routine maintenance consists of checking gearbox oil level and oil condition and greasing gearbox bearings at required intervals.
Before operation, lubrate gearbox with L-CKE/P 220~320# worn gear oil (while ambient temperature around -30~40℃; or with L-CKE/P 320~460# worn gear oil (while ambient temperature around 25~65℃. Verify that lubricant level in the gearbox reaches the bottom of the oil level plug. Refer to the following tables for oil quantities and approved lubricants.
Bearings should be cleaned and re-greased on the same schedule as oil changing. After cleaning, fill bearings to one-third of their free volume.
After 100 hours of initial startup, clean gearbox inside, add new grease oil. Then lubricated at every 2500-hour interval.
Lubricated with suitable grease oil as request. Refer following table with some interchangeable grease oil brand for users to choose at different ambient temperature.
While gearbox or motor temperature over 90°C, or vibrate/sound abnormally, shut up equipment and check immediately.
Fasten all linking bolts periodically.
GN Solids Control is the first API certified Solids Control Equipments manufacturer in China. Mud Agitator is one of our main products. Anyone interested in mud agitator, Please feel free to contact with GN Solids Control.
