one client from Africa are attempting to buy some drilling waste management and solids control equipment from us lately. As the project is important, they give request as beneath.
1 . That we will like to get the Dryer, Centrifuge and the add-ons in
Houston sent to all of us by air freight. The gear therefore should be dismantled as well as packaged in components with regard to air freight purposes.
2. That we will want the air shipping to be within next week through Houston to us. That people will arrange with our shipping forwarders in Houston to deal with the freight.
3. That we want the spares along with other accessories in China to find cargo air freight in order to us same next week. This will be handled by GNC.
4. That your Engineers ought to be prepared to come to our nation for the installation and coaching of our Personnel in 2weeks time at the most.
5. The advantages of this urgent service is due to the emergency situation we have been in now.
As it is substantial huge weight and dimensions, the cost will be much higher. All of us recommend the client to arrange transaction soon and then we can activity quickly on the delivery. Comparable things happen with many customers and proper stock gear can save lots of cost. All of us recommend client to have a much better control for the project and purchase the necessary equipment in advance to prevent paying much higher cost with regard to air freight.
GN Solids Control is China top manufacturer for solids control equipment and drilling waste materials management equipment and also shaker screens.
1) Sea shipping for solids control techniques and drilling waste management system is much better. Even the shipping time is about one to two a few months, but the cost is much less expensive.
2) Some small products, like centrifugal pump, mess pump, mud agitators, shaker screen, Vacuum Degasser can be shipped through air if project require them urgently. But anyway, all of us don’t recommend air shipping for any items.
Drilling Waste Management
03/09/2016
02/24/2016
Make Your Schedule of Meeting with GN People in 2016
Almost a season passed, but for China, the new year just started. After the long holiday, when we come back to work, a lot of work are going to be settled. Plan for visiting, and exhibition included.
According a recent report from Deloitte, Oil and natural gas plays have been as ckle as fashion in recent years, thanks in large part to technological advances, such as horizontal drilling, combined with multi-stage hydraulic fracturing, which have given companies access to previously unattainable or uneconomic resources. The dramatic changes in the quantities, locations, and price volatility of the hydrocarbons unlocked by technology create a significant challenge in aligning human capital resources with the various market demands.
Also in the report, it declares more and more oil gas related companies are going onto the edge of bankrapt, if the oil price keep the low price as now. Though some countries are getting together and sign agreement for lower down the production, to increase the oil price, but we all know this is not going to happen. As there is any chance, the business man will take the risk, will take it for profit. So what we will do is hold, and wait. The market will rearrange all the resources accoring it is own rules.
GN Solids Control is keep marching on all over the world, just like we are doing always, keep making good products, keep innoventing, keep moving on.
In this exhibition in Beijing, CIPPE, you will find more improvments of GN products. Well come back to the point, below will be a few good chances for you to meet with GN people.
This blog will only release two big chance: CIPPE BEIJING, OTC HOUSTON.
Below information regarding GN at CIPPE 2016
Address: New China International Exhibition Center, Beijing; No.88, Yuxiang Road, Tianzhu, Shunyi District, Beijing
Event Time: March 29-31, 2016
GN Booth No.: HALL E2 –E2200, booth area 272m2.
Appointment Email:[email protected]
GN Factory Location: 40KM to the Exhibition Center (40 Minutes Drive)For OTC 2016, GN still has 2 booths to entertain the clients. Below information will help you to locate GN’s booth.
Event Location: NRG Park, Houston, TX, USA
Event Time: 2-5 May 2016
GN Booth No. 1: Reliant Center 1652-A
GN Booth No. 2: Reliant Arena 9732
Many drilling waste management equipment will show on this exhibition. Welcome to visit it ,and any more question you can contract us.
01/22/2016
Choose a Suited Shale Shaker for You
Shale shakers are always considered to be the most efficient application in the marketplace of oil and gas drilling, with the solids control system, but also in waste management system for the drilling cuttings, and also, the mud cleaner is combined with a within flow shale shaker. Within HDD or CBM devices, the shale shaker has an important role in the mud recycling work. In some job, the operator uses merely one shale shaker to around treat the water based drilling mud.
The benefit of the shale shaker comparing with other dealing with equipments:
1 . comparing together with desander, desilter and the centrifuge, the shale shaker is employed for separating out the major amount of solids particles.
installment payments on your normally, for the solids control use, the shale shakers don’t need a feeding pump with large energy usage, like the desander or desilter which need high powered yellow sand pump as feeding pump respectively.
3. easy to transform shaker screens to different dimension of solids particle shapes.
How to choose a suitable shale shaker?
1 . per jobsite wanted capacity, you could choose a suited capacity shale shaker. GN Solids Control has two main models of shale shakers, GNZS594E shale shaker having 4 nos screens as well as a longer treating capacity in addition to treating route and GNZS703E shale shaker with three nos screens and a equally smaller treating capacity.
2 . not since the vibrating force decides the treating performance in the shale shaker, a good effectiveness motor is important too. GN use Italy Oli vibrating sex motors and sometimes use Charlie brand for option.
three. a high G force heurt motor request a strong shaker deck. GN use stainless-steel as material for shaker deck and complete heat cure to insure the robust structure and a longer longevity of the shale shaker.
5. a good sealing also important in order to shale shakers. GN features patent in the sealing involving shaker deck and the displays to ensure a good sealing and also successfully avoids the seeping of mud.
May you will have interest for more information, welcome to email us freely.
01/07/2016
GN Decanter Centrifuge and shales shaker screen intended for Oilfield Serivces
GN Solids Control have in contact with Oilfield Services A for over couple of years. The client is local Solids Control oilfield service company and possess business with some local acrylic drilling companies, as well as a number of overseas drilling company. We all met this company first time with Houston, USA, OTC convention, and after that, we achieved this client in NOG oil show 2015, that host in Abuja, Nigeria. After more meetings, your customer is trust in the high quality associated with GN decanter centrifuge and buying one set high speed centrifuge recently. The client also made the purchase batch of shaker screen which replacement screen with regard to Scomi shale shakers.
GN Solids Control replacement shale shaker screen for USA manufacturer shale shakers is very substantial cost-effective, longer lifetime, fine working performance and decrease unit price. We have standard client purchase shaker screen from GN each year inside containers.
GN premium decanter centrifuge is also replacement centrifuge for USA brand decanter centrifuges. Performance is almost similar, but price is less than half from the USA CENTRIFUGE price. For this reason we can sell over two hundred fifity sets decanter centrifuge annually. GN high speed decanter centrifuge GNLW363CG or variable velocity centrifuge GNLW363CG-VFD is equivalent to Swaco centrifuges / Derrick centrifuges / NOV brandt centrifuges. We have many client leasing centrifuge service from them, however shift to buy from people for long term lower manufacturing cost.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker , screw conveyor , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , mud gas separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Control hold hands using international oil service or solids control service or mud service companies, as well as great success in the past several years. In the upcoming new year, GN Solids will as always assist the client with high quality products and reliable service.
01/04/2016
The actual 9th Containerized Drilling waste Cuttings Drying System to Russia
By now, GN offers 8 units containerized style and design drilling waste cuttings blow drying system running in Russia, four of them locate at the career site of Russia Baker Hughes. Now the ninth drilling waste cuttings management system for Russia buyer has been already fabricated and also tested completely, waiting for supply to the customer. All the tools in this system are designed to mount within the container for winter operation.
This drilling squander cuttings drying system is usually consisting of below:
1 . just one set vertical cuttings dryer system containerized with winterization
2 . 3 units Attach Conveyor, two of them prefer feed the cuttings towards the vertical dryer, the other some may be for discharging drilling cuttings from the dryer.
3. a couple of sets decanter centrifuge along with one VFD design and also the one fixed speed. These two decanter centrifuges are placed on the solids control tank. However , both of centrifuges can be used handling the drilling mud coming from solids control tank as well as the drilling water discharged from the cuttings dryer.
4. 3 units bolt pumps, one for cuttings dryer flushing, and the additional two for feeding the particular centrifuges.
Below links may guide you to more information with GN’s vertical cuttings drying out system running in Russia:
Going Waste Management system to help Russia
Video: GN Cuttings Drying system Working in The ussr at Minus 40 M Degree
Containerized Drilling Squander Management System to Italy
Cuttings Dryer System to help Russia for Drilling Cuttings Waste Treatment
GN has already set up the office throughout Russia for a better in order to the customer, meanwhile, GN small business in Russia is trying to keep expanding with the support using this office.
By writing down down below address, you could get to
GN Solids Control (Russia)
Increase: Г. Москва, Радонежского Сергия Ул. д. 2
TEL: +7-8(925)304 25 70
+7- 8(968)950 31 49
Electronic mail: sales@gnsolidscontrol. com
12/07/2015
GN Cuttings dryer system to Spain for cold weather
GN Solids Control as China top rated manufacturer on drilling waste management system, dispatch an entire set dryer system to be able to Russia. It is the 3rd system ordered by the same buyer. And it is the 9th containerized waste management dryer system for Russia market.
Highlights of the drilling waste dryer system for Russia buyer
1) As we all know, Russia is exceedingly cold weather in winter. To take care of the winter and ensure fluent functionality, the dryer system will be put into the container, as well as the whole system is equipped with increased temperatures function.
2) Vertical cuttings dryer. It is put into typically the container with feeding pump and other accessories.
The marijuana is modified for uncomplicated equipment maintenance, and it is designed with lighting system and temperatures rising system.
3) 14 half inch decanter centrifuge 2 models:
1 set GNLW363C to get fixed speed control. The actual centrifuge is used for solids control drilling mud system.
1 set GNLW363C-VFD with regard to variable frequency control, it really is used for the treatment of drilling spend mud from solids control system.
4) Screw pump, German brand NETZSCH
The particular screw pumps are used to nourish the 2 sets decanter centrifuge and the vertical cuttings dryer respectively.
5) Screw conveyer for drilling cuttings exchange
GN Solids Control is a first China manufacturer along with supplier to Baker Huges for drilling waste management system. GN have 3set drilling cuttings dryer system in Russia for Baker Huges job site. Typically the system can be used for equally oil base mud (OM) treatment and water foundation mud (WBM) treatment. For further details of the Cuttings dryer system for Baker Huges Russia, please you check out GN website:
http://www.gnsolidscontrol.com/video/gn-cuttings-drying-system-working-in-russia-at-minus-40-c-degree
In case you have interest for more information of GN drilling cutting dryer system or want customized answer, welcome you contact GN group freely.
GN delivers global services. It is within Beijing China, have ware house and brand business in Houston U. Nasiums. and Russia. GN also provide international partners for quickly support for clients. Delightful you contact the nearest GN office for support.
Related Posts
11/02/2015
For Larger Opportunity and Challenge, GN Is on the Way
Established in the year of 2007, GN solids control walked through a road full of thistles and thorns. Today, GN definitely has played as the leader role of the China manufacturers for solids control equipment. Here we would like to share how GN is growing in the past 8 years, which proved GN is willing to face larger opportunity and challenge.
At the beginning of the foundation of GN, this company provided the full list of equipment for drilling mud recycling. During this period, GN’s equipment are mainly used for oil drilling, what GN’s equipment do is for primary solids control on the drilling mud which called drilling fluids. This type equipment are consisting of shale shaker, de-sander, de-silter and horizontal decanter centrifuge as well as some mud mixing equipment like mud agitator, mud gun. Also several types transferring pump are included in GN’s production line.
It is well known that there will be no process if a company cannot develop new technology or launch new equipment into the market. Focus on the no dig market, GN developed one type compact self-contained mud recycling system especially used for HDD project drilling mud recycling. This system is ranged from 200 GPM to 1500 GPM according to the treating capacity and the configuration. Australia is a market where the no dig technology is popular accepted and from GN’s first unit compact system sent to Australia in the year of 2011, over 20 units mud system already send there. GN’s this type mud system are also widely used in Coalbed Methane drilling projects. By now, GN has already realized to provide the complete mud system for both oil gas drilling and trenchless drilling projects.
With the issuing of more strict regulation on drilling waste disposal, more and more drilling contractors started to find some solution to recover more drilling fluids and produce more less discharges. Thus, there comes a new industry with the name of drilling waste management. The server of this business could used some drying equipment to recover more drilling fluids to make the drilling cutting more dryer for easy transportation, and then further treatment could be done on the cuttings in special facility. GN is also one of the manufacturers who always kept his eye on the market changing. As per the market request and customer’s feedback, GN launched the new equipment of vertical cuttings dryer and high G force drying shaker unit. After several-generation upgrading, the equipment are able to be used onsite with good performance. Later, GN continuously issued the design of the skid mounted waste management system which involves the cuttings dryer, waste centrifuge and transferring pump into one skid for easy transportation.
The requests from the market is always changing, you never know what the customer need. By using GN’s waste management system, some customers get back to GN with feedback ‘can you make the system more smaller footprint, as we don’t have enough space to put the large size skid’. Then GN’s modular design waste management equipment came to this world. The customer could get separate equipment from GN, and connect them onsite only with several pipes. This modular design brought great convenience for operator onsite as its layout is more freely.
In order to further reduce the cost of waste cuttings disposal and give better solution for the operators, GN designed the new equipment solidification unit for final disposal of the waste cuttings after treated by the waste management equipment. After treated by the solidification unit, the waste cuttings could be discharged directly for road paving, land farming, even to make the construction material.
GN will never fear the bad feedback from the customers, as each critics will push GN to a new level. GN will never satisfy with what have been got as it will make GN mark time. For larger opportunity and challenge, GN is already on the way.
08/06/2015
2 Complete Sets of Waste Management Systems for Africa
Just a few days ago, GN Solids Control has delivered 2 sets of standard drilling cuttings waste management systems to Africa. The end user is an international drilling company, who has been purchasing from GN for solids control systems for years. Now they are buying their first 2 sets of waste management systems, “GN is of course the second to none choice for us.” said the CEO of the company.
Besides the complete solids control systems, totally 4 sets, that company also purchased the mud plant, the decanters centrifuge packages from GN. And unless many other drilling companies who hire another service company to do the waste management service for them, this company plan to establish their own waste management dept, and doing it for themselves. GN Solids Control did not only provide them the systems, but also gave valuable experiences and advices in this field.
But for the waste management system with vertical cuttings dryers and decanter centrifuges for the drilling cuttings treatment for first stage, GN also provide solidification unit for finally stabilizing the drilling cuttings, mostly for water based mud and TDU system, mostly for oil based mud.
Since the global warming is affecting every individual and every country, the laws and regulations for protecting the environment is more and more serious and strict. Now not only for the oil and gas drilling, but also for HDD, CBM and piling, or TBM, many countries are establishing laws to limit the discharge from the cuttings to be disposed directly. The traditional mind of what equipments are used in what project is a bit out-dated.
In recent GN experiences, some HDD contractors are adopting centrifuges for their mud system, and some even using the dewatering systems. Now the boundaries between solids control equipments for different drilling industries are blurring.
No matter what kind of drilling you are using your equipments for, GN could provide a suitable and somehow customized system or solution for you.
Related Arciels:
- Helicopter decanter centrifuge with Helicopter mud tanks
- Drilling Waste Cutting Management System Onsite Layout Types
- Solids removal units for diamond drilling waste water treatment
- Modular Drilling Cuttings Waste Management Equipment for China TOP Oil Company
- Decanter centrifuge applications and Case study
07/30/2015
Drilling Waste Cuttings Transferred Equipment in Waste Management System
Acomplete drilling rig system always includes drilling floor block, mud solids control block and recovery, mud pump and power block. Among these, the mud solids control and recovery block is consisting of drilling mud recycling and drilling mud system. This block is used to maximally recover the valuable drilling mud and reduce the waste discharge.
The drilling waste cuttings management system sometimes called the further treatment for solids control. As the cuttings was delivered from out port of the primary solids control equipment like shale shaker and mud cleaner to the cuttings dryer unit. The main equipment for drilling waste cuttings recovery include cuttings transferred equipment, Verity G cuttings dryer, feeding pump and decanter centrifuge.
The cuttings transferred equipment is regarding as a bridge connecting the primary solids control system to the waste management unit. The common and popular method to transfer the cuttings is to use the screw conveyor and hose pump.
What is the Difference of the screw conveyor and hose pump
The screw conveyor itself has a collecting groove and the screw propeller push the cuttings to the Verti G cuttings dryer. As the screw conveyor is designed to transfer the cuttings along a straight line. Usually, on the site, there are not only 1 unit screw conveyor, several unit screw conveyors are located crossing with certain angles so that the waste cuttings could be delivered to the cuttings dryer. As the cuttings dryer feeding port is high, the screw conveyor is sloping. Then if the waste cuttings are high liquid content, the liquid would be flow back and overflow out the conveyor.
The drilling waste cuttings transferring equipment is important during the operation. GN has applied both the screw conveyor and hose pump in the design of the drilling waste management system, for more information, please contact with GN freely.
07/24/2015
Management of Drilling Waste
All wells is going to be drilled using the generation of waste, the waste consists of different type like drill cuttings, waste water, drilling liquids without used and completion liquids. The therapy on waste is going to be with respect to the drilling liquids type. You will find new ways to treat drilling waste like reduce, reuse, recycle and recover.
Recycle of drilling cuttings is exactly what GN Solids Control supply , you will see two sets screw conveyor to get drilling cuttings from shale shakers and feed to vertical cuttings dryer for treatment , then your vertical cuttings dryer will process drilling cuttings with water or oil content below 5 % , the dry drilling cuttings is going to be delivered away for more treatment and liquids content is going to be delivery to some small holding tank , you will see a little pump to get recycled drilling liquids and feed to some high-speed decanter centrifuge , the dry solids from centrifuge is going to be delivered away and clean fluid could be drop towards the clean tank in solids control system .
The vertical cuttings dryer was utilized mainly for oil base mud drilling cuttings however the GN new improvement allow it to be utilized by water base mud drilling cuttings also . GN Solids ‘s vertical cuttings dryer is 900 revolutions per minute with G pressure as much as 420 G , the super high-speed can be obtained at 1200 PRM with G pressure as much as 750 G for any better separation ability . The flight on the rotor are difficult facing to HRC 65, longer existence than our competitors. The oil lubes system with automatic alarm for pressure limit. The primary motor and oil water pump is interlocked with one another for staying away from the beginning of the primary motor just before the beginning of the oil water pump.
Related Arciels:
