TOP Companies in Oilfield

CIPPE Is nearly here, GN Is Coming

The each year oil and gas show is drilling to be saved in Beijing International exhibition simply by end of this month. Contrasting with last year’s CIPPE, this years’ schedule are later than usual.
GN Solids Control will attend that years CIPPE also, along with 400 sqm booth that is certainly located in E2 Hall. This season, GN will bring the newest layouts for decanter centrifuge , vertical cuttings dryer, the solids control tools and the mud cleaning system for other drilling similar to HDD, CBM and TBM. And also for piling and also water well drilling.
Through the exhibition, clients could also check out GN company which is based in Hebei Province, only 45 km from exhibition. GN headquarter and factory is at an industry zone just outdoor Beijing, and GN Solids Control’s second factory now's ready to open, it is positioned only 7 km coming from GN headquarter and with the exact same size as GN principal factory. Total area of GN now is around 430, 000 SF.

The spring is actually an exhibition season. In addition to the CIPPE Beijing, there are many acrylic shows to be held around the globe.
MOIGE oil and gas exhibition will probably be held in April in Moscow, where GN has a part office. GN has a unit of 55sqm in the MOIGE and will show GN decanter centrifuge, GN VG drying, GN shale shaker there.
OTC 2016 is drilling to be held in early May within Houston, TX, USA. As well as both GN Solids America, GN’s branch company based in USA, and GN Solids Control, with the main manufacturing and headquarter in The far east will attend the NON-PRESCRIPTION.
Iran Oil Show is usually scheduled just after OTC. It'll be held in Tehran, Iran. GN Solids Control also mail team to Iran Olive oil Show and show its GNLW363CG decanter centrifuge there.
You are welcome to come visit our factory or maybe our booth in previously referred to exhibitions. There are more exhibitions in the past year GN will attend, could you contact GN for more information different equipment such as shear pump , mud agitator, Mud Gas Separator, Vacuum cleaner Degasser , and also mud mixing system, drilling mud system..

GN Solidification Units, Practical Design for Drilling Cuttings

GN Solids Control is professional in all the closed loop for solids control and drilling waste management systems, including the mud cleaning system, the drilling cuttings waste management system, the drilling fluids waste management system like the dewatering units and the further and final treatment, like the solidification unit.

Based on the clients’ request in treating the drilling cuttings, GN continuously designed the vertical cuttings dryer for the solids discharged from the drilling mud system, and the decanter centrifuges application in the same system and also the high-G drying shaker and decanter centrifuge configurations. In the past year, GN designed and put into use a new solidification unit, which is specially for the final treatment of drilling cuttings from the water based mud.

This solidification unit was firstly tested and used at a domestic jobsite, and with the valuable feedback from the client and end user, GN updated the design and enlarged the treating capacity by 50%, then it was used in an oversea jobsite by a world top oil serve company. The update was proved to be practical and the treating result was satisfactory. After that, GN updated the design again. Now the new design has better than last design in performance but the structure is more compact.

Besides the solidification unit, GN Solids Control’s products also covers:

1. complete solids control line of drilling rig, including shale shaker, desander, desilter, mud cleaner, mud mixing unit, decanter centrifuge and all necessary pumps.
2. waste management systems for the drilling cuttings like the vertical cuttings dryer, high-G drying shaker, decanter centrifuge and screw conveyors.
3. solidification unit and TDU units, respectively for final treatment for water based mud and oil based mud.

        4,.dewatering unit and dewatering centrifuge for the treatment of drilling mud after recycled from the drilling mud system.

In all, GN Solids Control would like to provide a turn-key solution for your project in this field.

GN Solids America’s oilfield drilling fluid mud agitator

To prevent after-treated drilling mud separate by gravity while stored in the tank, it need a mud agitator to perform consist mixing. Mud agitator is functioning as assistant of whole solids control machinery system by provide continue rotate circulating force to maintain spec of treated drilling mud.

It contains a simple structure setup of turbine decelerator. Mud agitator is made in small size feather light weight and produce low noise yet strong mixing power. The industry standard of noise is 90 dab and GN Solids America’s mud agitator is excess the standard by suppressing the noise level and maintain the reliable function of mixing the drilling mud

GN Solids America’s mud agitator function in whole system were using a mechanical function mud agitator which contains a transfer device, shaft and impeller

There are two kind of set-up of mud agitator for the tank system. The vertical and horizontal type can fit into custom mud tank system

GN Solids America consist improve the mud agitator performance by user’s feed-back from the field. A large number of application based on the practice of developed, high efficiency, stirring intensity big, maintenance convenient highly competitiveness in the market of mud agitator.

Chinese leading solids control machinery manufacturer GN Solids Control supply the world’s top oil drilling companies and service contractors with drilling mud agitator equipments. We are an exporter of drilling fluid mud agitator for major company in seven world region. Our factory and company are Quality Management System ISO 9001-2000 certified and first Chinese solids control machinery manufacture certified by American Petroleum Institute. GN Solids Control’s Machineries operate international oil gas drilling mud system. We provide single source of sales, service, manufacturing, distribution. Purchase with piece of mind for drilling fluid mud agitator from Leading Chinese manufacturer. Your best mud agitator for drilling mud circulation system.

2016 CIPPE Beijing Oil Demonstrate is Coming for you

Using the approaching footsteps of Spring and coil, CIPPE Beijing Oil present is coming. As one of the biggest difficulties in March, there are almost 2000 companies have unit on the show. Next to OVER THE COUNTER Houston oil show within May, CIPPE Beijing essential oil show in March could be the second largest oil present in the world.
What you can see upon 2016 CIPPE Beijing olive oil show:
1) You can see a lot of worldwide famous oil corporations, not only from China, as well as from a different nation, like CNPC, SINOPEC, and the branch companies, Shell, Baker Hughes, Halliburton, Weatherford, Complete, BP …
2) You will observe most of the oil field providers companies from China, government corporations or private services businesses, like CNOOC, COSL, Greatwall Drilling,
2) You can see the vast majority of drilling companies and all the real thing drilling rig manufacturers supply by china manufacturer like SJ, RJ, YOU DO NOT NEED :
3) Various suppliers regarding oil and gas field will come to the oil, like mud sends, industry trucks, electrical engines, values, hoses, pipes, BOP, rigs, fittings,
As China and taiwan leading manufacturer of mud solids control and drilling waste management equipment, GN Solids Control will show the main equipment with the most current design and advanced technology. What you can see from GN Solids Control:
1) The full line mud solids control equipment: all modes shale shakers, mud cleaners, desanders, desilers, jet mud mixers, mud agitators, mud weapons …
2) The enhanced design drilling waste management equipment: big bowl decanter centrifuges, mini size decanter centrifuges, VG dryers, bolt conveyers, drilling cuttings renforcement unit, high G blow drying shaker

GN Solids Control owns different brands in order to service different regional buyers.
1) GN Solids Control America. It is GN Harrisburg Company.
2) GN Solids Control Russia
3) GN Solids Control Australia

As being the first China manufacturers dedicated to drilling waste management devices, GN Solids Control possesses rich experience in this area. GN engineering team as well available on the show. We are able to answer your various queries on drilling waste management.

GN Stainless Steel mud hopper with better quality

GN Solids Control mud hopper new model with stainless steel production material for longer use time and less maintenance. Most supplier use carbon steel mud hopper, not as good as stainless steel material. Not only mud hopper, GN Solids Control try every chance to perfect each solids control equipment and give much better user experience for each GN Solids control equipment.

 

1) GN mud hopper with centrifugal pump

 

GN can offer compact design for mud hopper with centrifugal pump & electric control panel. We call it jet mud mixer. This unit can work for oil & gas drilling, to mix bentonite or barite. This unit can also work for HDD drilling or other small drilling rigs. GN jet mud mixer with high quality and reasonable price is providing service to many different countries clients.

 

2) GN compact design of mud agitator

GN mud agitator is direct connection between motor and gearbox, much smaller footprint and compact design. We have different size mud agitator from 5.5kw motor power to 22kw motor power. Most clients will choose 7.5kw agitator or 11kw agitator, flexible use and lower price. GN Solids control can also offer self made electrical control box for the agitator. We have EX proof certificate for the mud agitator control box.

 

3) GN Centrifugal pump

GN new model centrifugal pump is equivalent to Mission magnum pump. Similar design and also spare parts replacement with each other. GN centrifugal pump can be used for feeding mud cleaner, for feeding desander cones or desilter cones. The centrifugal pump can also be used for transferring drilling mud from mud tank to next compartment. The centrifugal pump can work together with mud hopper, as mixing pump. Etc.

 

4) GN screw pump

GN screw pump is outsourced from Germany brand Netzsch pump. This pump is ideal pump for centrifuge feeding. The stable flow can work very well. Each year, we export over 200sets centrifuge with 200sets screw pump for feeding. Some clients will buy more screw pump in stock for better service.

 

Best shipment of solids control equipment

one  client from Africa are attempting to buy some drilling waste management and solids control equipment from us lately. As the project is important, they give request as beneath.

1 . That we will like to get the Dryer, Centrifuge and the add-ons in
Houston sent to all of us by air freight. The gear therefore should be dismantled as well as packaged in components with regard to air freight purposes.
2. That we will want the air shipping to be within next week through Houston to us. That people will arrange with our shipping forwarders in Houston to deal with the freight.
3. That we want the spares along with other accessories in China to find cargo air freight in order to us same next week. This will be handled by GNC.
4. That your Engineers ought to be prepared to come to our nation for the installation and coaching of our Personnel in 2weeks time at the most.
5. The advantages of this urgent service is due to the emergency situation we have been in now.

As it is substantial huge weight and dimensions, the cost will be much higher. All of us recommend the client to arrange transaction soon and then we can activity quickly on the delivery. Comparable things happen with many customers and proper stock gear can save lots of cost. All of us recommend client to have a much better control for the project and purchase the necessary equipment in advance to prevent paying much higher cost with regard to air freight.

GN Solids Control is China top manufacturer for solids control equipment and drilling waste materials management equipment and also shaker screens.

1) Sea shipping for solids control techniques and drilling waste management system is much better. Even the shipping time is about one to two a few months, but the cost is much less expensive.

2) Some small products, like centrifugal pump, mess pump, mud agitators, shaker screen, Vacuum Degasser can be shipped through air if project require them urgently. But anyway, all of us don’t recommend air shipping for any items.

GN Mixing Mud System is definitely Delivered to Middles East HDD jobsite

GN Solids Control manufactures many lightweight and standard mud methods for HDD, Trenchless, Uninteresting and No-dig Drilling parts,replacement shale shaker screen. All of these mud recycling methods are divided by 200GPM, 500GPM and 1000GPM while consider the treating capacity.
Furthermore those standard mud recycling where possible systems, GN also offers many customized systems depending on customers various demands. Lately, GN Solids Control merely delivered one set of Bentonite mixing system to one Middle Alleviate client, they will use this bentonite mixing system to render with the former GN 700 GPM HDD mud system that they purchased before.
We all know, in order to keep the drilling operating smoothly, we need to add some compounds such as bentonite or barite. This customized mixing system is especially designed to fit the particular 500 GPM mud system.

This GN mixing system is including the following principal parts:
1 . GN Mud tank
GN manufactures various mud tanks for mud storage and mixing mud. GN professional engineers fantastic at welding steel dish together and the QC team also has very strict policies on the checking before abandon factory.
2 . GN Aircraft Mud Mixer
By using a couple hoppers, GN jet mud mixer can enlarge the functional room and help to mixing the bentonize for different mud tank. One small mud hopper is fixed about the skid, bentonite can be extra by put in the hopper that result in a sharp spine help to available the package.
Another substantial hopper is build using a stand, so large bentonize can be added from the the top of the stand, the metal framework will help to hold those significant bentonize bags.
3. GN Centrifugal Pump
Centrifugal pump is used to pump often the mixed fluids into the drilling rigs. Some auxiliary items such as the ladder, handrails etcetera are also provided for safety.GN also can provide other pumps such as shear pump.
Using the successful usage of GN500 GPM drilling mud system for HDD area, more drilling global businesses are coming to GN for their drilling solutions.

GN Small Mud System can be used for HDD project

GN Small Mud System can be used with regard to HDD project, Water Very well Drilling project, Geothermal Drilling project, workover oil drilling rig etc . Recently, we certainly have one set 500gpm mud system ready for delivery, it really is for water well drilling project. The client buy one placed 200gpm trailer mounted mud system in 2014 as well as repeat order in stop of 2015.

500gpm mud system including below products:
1) One set 500gpm treating capacity shale shaker: GNZS703E-DZ. The shaker is by using box feeder, convenient regarding water well drilling rigs, 3 Panel shaker screen locked by wedges, less complicated for shaker screen replacing
2) One set 500gpm treating capacity mud cleaner: GNZJ703E-1S8N. The mud cleaner is with same deck shaker as GNZS703E-DZ. 3 Panel shaker screen locked through wedges, easier for shaker screen replacement; Shaker veranda made from stainless steel for extended lifetime
3) One fixed mud agitator. The mud agitator is installed on thoroughly clean mud storage compartment to be able to suspend the mud also to mix the mud soon after adding chemicals.
4) 1 set mud hopper along with two sets centrifugal pump. One pump is spread out the mud from mud tank to hopper, to combine the adding chemicals, one other one to suck the mud out for drilling computer.

Meanwhile, 2 sets 1500gpm mud system for household client HDD project are set for delivery. The client useful for tunneling project.
1500gpm mud system including below things:
1) 3 sets 500gpm treating capacity shale shaker: GNZS703E-DZ, totally treating potential 1500gpm
2) 1 established 1500gpm treating capacity mud cleaner: GNZJ703E-3S16N.
3) A single mud recycling tank along with shale shaker & mud cleaner
4) One mud storage tank with mud agitator / mud gun to storage / mixture clean mud ready for employ

GN Solids Control typically offer small capacity mud system to big capacity drilling mud system for different requirement software. Eg. 200gpm mud system, 350gpm mud system, 500gpm mud system, 1000gpm mud system, 1500gpm mud system… If you have some requirements, could you contact us freely.

Decanter centrifuge system for mining sector

GN high speed decanter centrifuge is widely used throughout oil & gas going, CBM, HDD, waste h2o treatment, oily sludge splitting up, clay mine, tank cleanup, as well as mining industry.
The other day, GN decanter centrifuge system was dispatch for a Eastern side Asia customer. The system will be used for mining sector. The function of the system is to reduce the water written content.

The decanter centrifuge system including following:
1) a single ea shale shaker GNZS594E.
It is 4-panel shale shaker with linear motion. The particular shaker screen we have metal frame and composite materials for option. The shale shaker can be used to treat punch mud as solids control shale shaker. It can also be employed as High G dry skin shaker with high G drive to treat drilling cuttings. Often the linear motion design with Adaptable high G force help make GNZS594 very popular for any sorts of drilling including: oil gasoline drilling, CBM drilling, HDD, water well, geothermal very well drilling mud cleaning. The straightforward but heavy duty design would make GNZS594 shale shaker get reliable operation with significantly less maintenance.
2) 2 app decanter centrifuge GNLW363CG-VFD.
It really is GN C-generation advance design and style centrifuge. Two motors associated with GNLW363 centrifuge mounted on 1 end, parallel and at the same elevation for smallest impact and maximum accessibility. Often the centrifuge Bowl material made out of Duplex Stainless steel 2205 through centrifugal casting, which is greater than SS304 and SS316. Stainless-steel conveyor heat treatment to 1000℃ for better energy. The opening on the conveyor does increase the capacity with the centrifuge. The centrifuge solids discharge port is guarded by special ceramic inserts, it is anti-abrasive and with lengthier life time. Furthermore, GN provide bowl lifting bracket to defend the bearing during vehicles.
3) 2 each Nourishing pump for 2 each decanter centrifuge respectively
The give food to pump is from U . k . brand NETZSCH. Fluids feel material SS316L.
4) Electric control system for all earlier mentioned equipments.
4) Mud tank, 1 ea, all preceding items mounted on the tank for turnkey solution.

Related Posts

• Different Models of GN Decanter Centrifuges
• GN Decanter Centrifuge for CSG Drilling Projects
• GN high speed centrifuge for waste water treatment
• Dual Centrifuge system intended for waste management

For Larger Opportunity and Challenge, GN Is on the Way

Established in the year of 2007, GN solids control walked through a road full of thistles and thorns. Today, GN definitely has played as the leader role of the China manufacturers for solids control equipment. Here we would like to share how GN is growing in the past 8 years, which proved GN is willing to face larger opportunity and challenge.

At the beginning of the foundation of GN, this company provided the full list of equipment for drilling mud recycling. During this period, GN’s equipment are mainly used for oil drilling, what GN’s equipment do is for primary solids control on the drilling mud which called drilling fluids. This type equipment are consisting of shale shaker, de-sander, de-silter and horizontal decanter centrifuge as well as some mud mixing equipment  like mud agitator, mud gun. Also several types transferring pump are included in GN’s production line.

It is well known that there will be no process if a company cannot develop new technology or launch new equipment into the market. Focus on the no dig market, GN developed one type compact self-contained mud recycling system especially used for HDD project drilling mud recycling. This system is ranged from 200 GPM to 1500 GPM according to the treating capacity and the configuration. Australia is a market where the no dig technology is popular accepted and from GN’s first unit compact system sent to Australia in the year of 2011, over 20 units mud system already send there. GN’s this type mud system are also widely used in Coalbed Methane drilling projects. By now, GN has already realized to provide the complete mud system for both oil gas drilling and trenchless drilling projects.

With the issuing of more strict regulation on drilling waste disposal, more and more drilling contractors started to find some solution to recover more drilling fluids and produce more less discharges. Thus, there comes a new industry with the name of drilling waste management. The server of this business could used some drying equipment to recover more drilling fluids to make the drilling cutting more dryer for easy transportation, and then further treatment could be done on the cuttings in special facility. GN is also one of the manufacturers who always kept his eye on the market changing. As per the market request and customer’s feedback, GN launched the new equipment of vertical cuttings dryer and high G force drying shaker unit. After several-generation upgrading, the equipment are able to be used onsite with good performance. Later, GN continuously issued the design of the skid mounted waste management system which involves the cuttings dryer, waste centrifuge and transferring pump into one skid for easy transportation.

The requests from the market is always changing, you never know what the customer need. By using GN’s waste management system, some customers get back to GN with feedback ‘can you make the system more smaller footprint, as we don’t have enough space to put the large size skid’. Then GN’s modular design waste management equipment came to this world. The customer could get separate equipment from GN, and connect them onsite only with several pipes. This modular design brought great convenience for operator onsite as its layout is more freely.

In order to further reduce the cost of waste cuttings disposal and give better solution for the operators, GN designed the new equipment solidification unit for final disposal of the waste cuttings after treated by the waste management equipment. After treated by the solidification unit, the waste cuttings could be discharged directly for road paving, land farming, even to make the construction material.

 

GN will never fear the bad feedback from the customers, as each critics will push GN to a new level. GN will never satisfy with what have been got as it will make GN mark time. For larger opportunity and challenge, GN is already on the way.