TOP Companies in Oilfield

GN Solids America LLC's GNZS series model 594 shale shaker

GN Solids America LLC's GNZS Shale shaker has been in-house design and manufacture a full line of  shale shakers with a full line of replacement shale shaker screens. GNZS's elliptical shale shaker used for drilling fluids filtering. The vibration produce by  two 1.5 horse powered motor create  linear motion  filtering drilling cuttings from a circulation. The main purpose of use is to remove as largest solids without lost large amounts of drilling fluids.

GNZS 594 Shale shaker used in many industries such like:

• Oil and Gas well drilling mud purification
• Coal gas bed drilling slurry solids control
• Horizontal directional drilling
• Thermal well drilling, other civil construction slurry separation
• Mining slurry separation and recycling

GNZS 594 shale shaker is one of the design support of the linear motion shaker which has become the main type of shale shaker in use on drilling fluids filter system. The vibration produce by motors induced by the linear motion shale shaker.  GN Solids America LLC consist improve the design of shale shaker and currently evolve to 4th generation of design due to the demand high performance on drilling mud filtration and circulation around 60 plus country in the world. 

Easy operation with low maintenance of GNZS 594 Shale shaker:

• Optional Scalping Deck with flow back tray available for all shaker models. (See Scalping Deck Advantages)
• Explosion Proof Starters to make sure safe operation.
• Various kind of shale shaker screen panels for different mud situation .
• Low noise operation
• Energy absorption plate at the Screen Deck to reduce initial fluid impact and stress on screens.
• Screen Deck angle (-1˚ to + 5˚)can be adjusted mechanically while operating, with ratcheting system
• Electrical wiring harness shielded in rigid conduit and mounted off of vibrating deck

 

Related Posts

• GN API Shale Shaker Screen
• The need-to-know base of shale shaker
• GN Shaker Screens Getting More Famous
• Most Efficient Equipment Used for Solids Control & Waste Management

Meet GN Solids Control @ MIOGE 2016

MIOGE is coming in the following month, which is one of the largest necessary oil show in the world. GN Solids Control attends the oil demonstrate each year in past your five years, meet lots of fresh client via the exhibit, including oil drilling firms, mud service companies, essential oil tools trading and provider companies, solids control provider companies etc . Welcome to GN Solids Control booth in MIOGE to talk more win win business.
Booth No .: Pavilion-2, Hall-5, C 40
Demonstrate Time: April 18-21, 2016
Show Location: EXPOCENTER, Moscow, Russia
Appointment email: sales@gnsolidscontrol. com
Note: Pls carry out send us email or maybe call us in advance to let you know if you are coming to the booth at MIOGE. And that we can do necessary preparations to your coming.

Below our Moscow office contact for guide:
Location: Г. Москва, Радонежского Сергия Ул. д. only two
Phone: +7-8(925)304 25 60 to 70 +7- 8(968)950 31 1949
Website:
The next chapters are some information about the solids control & drilling waste management equipment coming to the particular booth for exhibition.
1) Drilling waste management usable cuttings dryer GNCD930D
GN vertical cuttings dryer is equivalent to PEOPLE brand vertical dryers, we are growing market each year to guide more clients in drilling waste management. The up and down cuttings dryer can deal with the drilling cuttings released from shakers line and also the solids with Essential oil less than 5%. After remedy, the cuttings can be very easily to collect, transport or additional treatment.

2) Drilling waste management & solids control decanter centrifuge GNLW363CG
GNLW363CG decanter centrifuge with max. dish speed 3900RPM can be utilized in many different areas, from minimal speed function to central speed to high speed; distinct speed range can individual different size particles to achieve different purpose.
GNLW363CG predetermined speed centrifuge, the offered speed 2200rpm /2700rpm suggestions 3200rpm can be reached by transforming belt pulley, much great price and easy operation.
GNLW363CG-VFD variable speed centrifuge, rate can be changed stepless through 0 to 3200rpm, cost are higher, but the speed alter is much faster than predetermined speed centrifuge.
1600RPM in order to 2000RPM bowl speed can be employed for barite recovery
2200RPM to 2700RPM bowl velocity can be used for mud fat cutting
2800RPM to 3200RPM bowl speed can be used with regard to fine solids removal, drilling waste management

3) Solids Control Mud Cleaner GNZJ594E-3S16N
GN 4 panel mud cleaner is equivalent to US brand mud cleaner, replacement to Swaco Mongoose mud cleaner. The particular shale shaker screen is also alternative to Swaco Mongoose composite materials screens. The total treating potential can reach to 1500GPM with 3 desander cones & 16 desilter cones.
Looking forward to meet you there for much more business talking, Thanks for your examining.

Slurry Separation Technology Used in TBM Project

TBM projects are mainly the constructions in high way, railway, civil project of city and for laying the water pipes and electric transferring pipes with Tunnel Boring Machine. As long as the environment protection standards in many countries are higher than before, and the tunnel boring technology is developing rapidly, the requests for slurry separation technology and procedure are higher than before.

As the environment protection trend is spreading globally, ever since its design step, the slurry separation unit is aimed to take into consideration not only the efficiency and cost reduction, but also to give the least harm to the surrounding. GN Solids Control has been working in this industry as the slurry unit or slurry plant manufacturer for many years. By collecting feedbacks from end user and contractors of TBM project and based on the previous experiences, GN Solids Control designed and put into market many configurations of TBM slurry units with the smallest cutting point as 2-5 microns.

Some standards of GN Solids Control are from the high standards of clients who are world widely famous TBM Contractors, their requests are based from their working experiences, the countries’ environment standards and such requests are difficult to reach but reasonable and useful. As one of GN’s goal is to change the China Make into China Intelligent, GN spared no efforts to fulfill the clients’ request and came to the high standard equipment.

GNMS series Mud mixing system always contains 2 phase of separation, the shale shaker for separating the particles larger than 100 microns, and the desander cones of 10 inches to separate out particles larger than 40 microns. This standard design is suitable for most countries and cases, and on special request of client, GN could also add desilter cones of 4 inch to separate out the 20 microns above particles, middle speed decanter centrifuge for 5-7 microns and high speed decanter centrifuge for 2-5 microns.

For more information, pls email to [email protected].

Shaker and mud cleaner export in order to Middle East

As the Tiongkok leading solids control gear brand, GN Solids Control export lots of solids control equipment to all over the world, specifically to Africa countries as well as Middle East countries. Not too long ago, we just finish a couple sets 500gpm mud cleaning system for one old customers from Middle East. Many people bought one sets 500gpm mud cleaning system in 2013 and are very satisfied with the running performance and high quality devices. And now they have more plans and repeat order to you.

1) GNZS703E-HB Shale shaker for Middle East customer
The shale shaker is usually GN mature model shaker which have been working for the drilling industry over 5 many years. The stable working overall performance and less maintenance get great reputation from clients. GNZS703E-HB shaker is shale shaker with 3 panel shaker screen, carbon steel framework shaker screen for lengthier life use. The shaker screen is installed through rubber wedge for quick installation and fast disassembly. Other spare parts is the plastic seal.

2) GNZS703J-1S8N mud cleaner for Middle Eastern side client
The mud cleaner is combination of shale shaker, desander cones and desilter cones. The desander cones and desilter cones will probably be fixed on one steel structure which can be fast assemble or even disassemble from the shaker within.
The mud cleaner will need two sets centrifugal pump for feeding, our centrifugal pump is equivalent or perhaps replacement for NOV brandt assignment pump.

3) Except for the actual shaker and mud cleaner, the client also bought three sets of vertical slurry pump to transfer the particular waste mud in hole to shale shaker. The actual vertical submersible slurry pump is better for waste mud with big particles, far more anti-corrosive.

Except for HDD venture, underground tunneling project, exploration project, diamond drilling, central drilling, GN solids control equipment is mostly used for necessary oil & gas drilling industry. GN can offer complete brand of solids control system to fulfill the different requirement from diverse clients, including 500gpm mud cleaning system, 1000gpm mud cleaning system, 1500gpm mud cleaning system and so on

GN Outdoor Bodily training to refresh

To experience improve team productivity as well as competitiveness objectives, GN Solids Team just finish Out and about door physical training a while back. It is a journey of comforting, an experience of sharing as well as a Sublimation of Thought. Once more, we are full of energy to work tricky and achieve better gross sales amount.

GN Solids Sales force is a group of young man brimming with love to life, love to perform and love to family. Create a better life, GN workforce with only about 15 men and women, can achieve over 10million YOU dollars sales amount. Undoubtedly, except for person reason, the favorable sales results also be determined by the perfect work platform, ideal to start courses of GN management, appropriate reward and punishment system. This physical training can also be can contribute to the end results in the certain degree.

In the past yrs, we beat international manufacturer solids control supplier as well as win quite a few projects. Acquire some typical samples on your reference:

1) PDVSA major order for a batch regarding shakers, mud cleaners, decanter centrifuges, Vacuum Degasser.
PDVSA is much close to UNITED STATES OF AMERICA and have much more year’s enterprise cooperation with USA brand name solids control equipment. Playing with year of 2012 to help 2013, the clients acquire more than 1 million dollar solids control equipment from GN. Until now, we give continuously tech support team to them.
2) Russia large client’s big order to get 4 sets of drilling waste management system
As a way to reduce production cost, typically the Russia big clients likewise come to China in 2014. After they checked different solids control supplier in The far east, they come back to GN as well as sit down to talk about the order process finally. Until now, typically the drilling waste management system is working well in rigsite. The client is trying to buy a lot more.
3) Nigeria drilling business buy a batch of straight cuttings dryer, decanter centrifuges, bolt pumps, screw conveyors through 2014 to now.
The actual Nigeria drilling company get 7 land rigs and want continuously solids control products support. Each year, we head over to Nigeria many times to support this company there.

CIPPE Is nearly here, GN Is Coming

The each year oil and gas show is drilling to be saved in Beijing International exhibition simply by end of this month. Contrasting with last year’s CIPPE, this years’ schedule are later than usual.
GN Solids Control will attend that years CIPPE also, along with 400 sqm booth that is certainly located in E2 Hall. This season, GN will bring the newest layouts for decanter centrifuge , vertical cuttings dryer, the solids control tools and the mud cleaning system for other drilling similar to HDD, CBM and TBM. And also for piling and also water well drilling.
Through the exhibition, clients could also check out GN company which is based in Hebei Province, only 45 km from exhibition. GN headquarter and factory is at an industry zone just outdoor Beijing, and GN Solids Control’s second factory now's ready to open, it is positioned only 7 km coming from GN headquarter and with the exact same size as GN principal factory. Total area of GN now is around 430, 000 SF.

The spring is actually an exhibition season. In addition to the CIPPE Beijing, there are many acrylic shows to be held around the globe.
MOIGE oil and gas exhibition will probably be held in April in Moscow, where GN has a part office. GN has a unit of 55sqm in the MOIGE and will show GN decanter centrifuge, GN VG drying, GN shale shaker there.
OTC 2016 is drilling to be held in early May within Houston, TX, USA. As well as both GN Solids America, GN’s branch company based in USA, and GN Solids Control, with the main manufacturing and headquarter in The far east will attend the NON-PRESCRIPTION.
Iran Oil Show is usually scheduled just after OTC. It'll be held in Tehran, Iran. GN Solids Control also mail team to Iran Olive oil Show and show its GNLW363CG decanter centrifuge there.
You are welcome to come visit our factory or maybe our booth in previously referred to exhibitions. There are more exhibitions in the past year GN will attend, could you contact GN for more information different equipment such as shear pump , mud agitator, Mud Gas Separator, Vacuum cleaner Degasser , and also mud mixing system, drilling mud system..

GN Solids Control Stock Centrifuges for sell

Even in the down time associated with oil drilling industry, we would like to give the best price as well as fast delivery to customer. And we stock about sixty sets high speed decanter centrifuge to satisfy the one year requirements for domestic market as well as overseas market. The decanter centrifuge is 14inch bowl centrifuge, can be used for both solids control project and drilling waste management project. The centrifuge is by using certificate; both can be used with regard to onshore drilling project as well as offshore drilling project. For those who have some urgent project, could you contact us freely to get dependable product in short delivery period.

14inch decanter centrifuge- GNLW363C main technical specifications
1) The centrifuge is equivalent to ALL OF US brand centrifuge, we have numerous client formerly use ALL OF US brand centrifuges, but now these people like GN centrifuge due to the high cost-effective products.
2) The centrifuge is with maximum configuration and best materials for long and dependable service.
3) Bowl Cylindrical and Conical section produced from Duplex Stainless Steel 2205 through centrifugal casting, which is a lot better than SS304 or SS316.
4) Other Parts of the bowl set up material: stainless steel SS316L. These types of parts no need SS2205.
5) Screw protection type: Tungsten Carbide Tiles for lengthier life and easier alternative. The price of this part can also be very good, make it more convenient with regard to clients.
6) Screw circulation distribution port and dish solids discharge port guarded by tungsten carbide blend. This idea is similar since the screw protection, reliable as well as lower cost.
7) Bowl set up supported by tighten belt with regard to protection of bearing within moving. This is very important, we have many in past experience that this bowl damaged because of transport and delay the client’s project. But now, this will not occur.
8) Pressurized EX evidence control panel make the centrifuge can be used in high temperature places, much reliable than fire proof type control panel.
Except for 14inch bowl centrifuge, we also have other kind for choice, GNLW223 child centrifuge, GNLW452 18inch centrifuge, GNLW453 18inch high speed centrifuge, GNLW553 big bowl large capacity centrifuge.
Other solids control equipment: shale shaker , mud cleaner, mud agitator, shear pump, mud gun, screw pump, vertical cuttings dryer, mess conveyor etc .

GN Mixing Mud System is definitely Delivered to Middles East HDD jobsite

GN Solids Control manufactures many lightweight and standard mud methods for HDD, Trenchless, Uninteresting and No-dig Drilling parts,replacement shale shaker screen. All of these mud recycling methods are divided by 200GPM, 500GPM and 1000GPM while consider the treating capacity.
Furthermore those standard mud recycling where possible systems, GN also offers many customized systems depending on customers various demands. Lately, GN Solids Control merely delivered one set of Bentonite mixing system to one Middle Alleviate client, they will use this bentonite mixing system to render with the former GN 700 GPM HDD mud system that they purchased before.
We all know, in order to keep the drilling operating smoothly, we need to add some compounds such as bentonite or barite. This customized mixing system is especially designed to fit the particular 500 GPM mud system.

This GN mixing system is including the following principal parts:
1 . GN Mud tank
GN manufactures various mud tanks for mud storage and mixing mud. GN professional engineers fantastic at welding steel dish together and the QC team also has very strict policies on the checking before abandon factory.
2 . GN Aircraft Mud Mixer
By using a couple hoppers, GN jet mud mixer can enlarge the functional room and help to mixing the bentonize for different mud tank. One small mud hopper is fixed about the skid, bentonite can be extra by put in the hopper that result in a sharp spine help to available the package.
Another substantial hopper is build using a stand, so large bentonize can be added from the the top of the stand, the metal framework will help to hold those significant bentonize bags.
3. GN Centrifugal Pump
Centrifugal pump is used to pump often the mixed fluids into the drilling rigs. Some auxiliary items such as the ladder, handrails etcetera are also provided for safety.GN also can provide other pumps such as shear pump.
Using the successful usage of GN500 GPM drilling mud system for HDD area, more drilling global businesses are coming to GN for their drilling solutions.

GN Decanter Centrifuge and shales shaker screen intended for Oilfield Serivces

GN Solids Control have in contact with Oilfield Services A for over couple of years. The client is local Solids Control oilfield service company and possess business with some local acrylic drilling companies, as well as a number of overseas drilling company. We all met this company first time with Houston, USA, OTC convention, and after that, we achieved this client in NOG oil show 2015, that host in Abuja, Nigeria. After more meetings, your customer is trust in the high quality associated with GN decanter centrifuge and buying one set high speed centrifuge recently. The client also made the purchase batch of shaker screen which replacement screen with regard to Scomi shale shakers.
GN Solids Control replacement shale shaker screen for USA manufacturer shale shakers is very substantial cost-effective, longer lifetime, fine working performance and decrease unit price. We have standard client purchase shaker screen from GN each year inside containers.

GN premium decanter centrifuge is also replacement centrifuge for USA brand decanter centrifuges. Performance is almost similar, but price is less than half from the USA CENTRIFUGE price. For this reason we can sell over two hundred fifity sets decanter centrifuge annually. GN high speed decanter centrifuge GNLW363CG or variable velocity centrifuge GNLW363CG-VFD is equivalent to Swaco centrifuges / Derrick centrifuges / NOV brandt centrifuges. We have many client leasing centrifuge service from them, however shift to buy from people for long term lower manufacturing cost.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker , screw conveyor , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , mud gas separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Control hold hands using international oil service or solids control service or mud service companies, as well as great success in the past several years. In the upcoming new year, GN Solids will as always assist the client with high quality products and reliable service.

Holk Type Shaker Screen

Holk type shaker screen is the most popular type shaker screen , it will be one to three layers of screen mesh . The hookstrip welded on screen panel end for installation , the screen panel will be tensioned on shaker deck and locked by bolt or channel lock . The shaker deck has to be crowned to allow maintain screen .

 

1. The shaker screen cloth is pasted by glue directle to the screen frame , there will be 1 to 3 layer depending on requirement , The additional glue lines will be include between frame members and for provide additional support . 
2. This holk type screen design is a good design to maximized usable screen area . But there will be a larger area that unsupported which will limit cloth selection , so the panel will not considered to repair .
3. The screen mesh cloth can be bonded to a perforate back metal plate which looks like a hook strip screen .

 

Screen Blinding and Plugging

 

The shaker screen blinding will happen when grains of solids lodge in the screen hole ,  This will happen very often when there are a lot fine solids , It will be happened during shaker screen blinding .

 

1. During drilling fluids circulation , the fine solids drop through the screen in a very short distance when a new shaker screen installed .
2. Then the fluids endpoint will move to the end of shale shaker deck .
3. If this happen , the shaker screen will be changed to allow rapid drilling mud discharge .
4. The shaker screen will be need washed , then the fine and that lodged in the screen hole serface can be seen .

 

GN Solids supply different kinds of shaker screen including hook type shaker careen and wedge type shaker screen .