GN Solids Control is professional in all the closed loop for solids control and drilling waste management systems, including the mud cleaning system, the drilling cuttings waste management system, the drilling fluids waste management system like the dewatering units and the further and final treatment, like the solidification unit.
Based on the clients’ request in treating the drilling cuttings, GN continuously designed the vertical cuttings dryer for the solids discharged from the drilling mud system, and the decanter centrifuges application in the same system and also the high-G drying shaker and decanter centrifuge configurations. In the past year, GN designed and put into use a new solidification unit, which is specially for the final treatment of drilling cuttings from the water based mud.
This solidification unit was firstly tested and used at a domestic jobsite, and with the valuable feedback from the client and end user, GN updated the design and enlarged the treating capacity by 50%, then it was used in an oversea jobsite by a world top oil serve company. The update was proved to be practical and the treating result was satisfactory. After that, GN updated the design again. Now the new design has better than last design in performance but the structure is more compact.
Besides the solidification unit, GN Solids Control’s products also covers:
- complete solids control line of drilling rig, including shale shaker, desander, desilter, mud cleaner, mud mixing unit, decanter centrifuge and all necessary pumps.
- waste management systems for the drilling cuttings like the vertical cuttings dryer, high-G drying shaker, decanter centrifuge and screw conveyors.
- solidification unit and TDU units, respectively for final treatment for water based mud and oil based mud.
4,.dewatering unit and dewatering centrifuge for the treatment of drilling mud after recycled from the drilling mud system.
In all, GN Solids Control would like to provide a turn-key solution for your project in this field.
