TOP Companies in Oilfield

GN Solids America LLC's GNZS series model 594 shale shaker

GN Solids America LLC's GNZS Shale shaker has been in-house design and manufacture a full line of  shale shakers with a full line of replacement shale shaker screens. GNZS's elliptical shale shaker used for drilling fluids filtering. The vibration produce by  two 1.5 horse powered motor create  linear motion  filtering drilling cuttings from a circulation. The main purpose of use is to remove as largest solids without lost large amounts of drilling fluids.

GNZS 594 Shale shaker used in many industries such like:

• Oil and Gas well drilling mud purification
• Coal gas bed drilling slurry solids control
• Horizontal directional drilling
• Thermal well drilling, other civil construction slurry separation
• Mining slurry separation and recycling

GNZS 594 shale shaker is one of the design support of the linear motion shaker which has become the main type of shale shaker in use on drilling fluids filter system. The vibration produce by motors induced by the linear motion shale shaker.  GN Solids America LLC consist improve the design of shale shaker and currently evolve to 4th generation of design due to the demand high performance on drilling mud filtration and circulation around 60 plus country in the world. 

Easy operation with low maintenance of GNZS 594 Shale shaker:

• Optional Scalping Deck with flow back tray available for all shaker models. (See Scalping Deck Advantages)
• Explosion Proof Starters to make sure safe operation.
• Various kind of shale shaker screen panels for different mud situation .
• Low noise operation
• Energy absorption plate at the Screen Deck to reduce initial fluid impact and stress on screens.
• Screen Deck angle (-1˚ to + 5˚)can be adjusted mechanically while operating, with ratcheting system
• Electrical wiring harness shielded in rigid conduit and mounted off of vibrating deck

 

Related Posts

• GN API Shale Shaker Screen
• The need-to-know base of shale shaker
• GN Shaker Screens Getting More Famous
• Most Efficient Equipment Used for Solids Control & Waste Management

High pressure Air Powered Wash Down Pump oil industry

Features of air powered highly pressured wash pump
The high force air wash pump is by using air engine for highly pressured. It is a kind of cleaning get rid of pump. The air engine generator compresses air as electrical power source. The air powered ruthless wash pump does not produce electric spark. It will not always be overheating, or explosion. It can be safe and without some other risk factors the same having electrical driven pumps.

1) The air powered wash pump is with low speed pump
2) The pump, appropriate parts and hoses are typical made from anti-corrosive
3) It truly is 3 ea ceramic intervention designs
4) The air power high pressure pump is equipped with longevity time sealing
and metal valve
5) There is build-in by-pass valve and basic safety valve for the air run high pressure wash down pump
6) No spark atmosphere drive air filter, regulator in addition to lubricator
7) Build-in silencer
Applications of air powered highly pressured wash pump
It can be work with as long-distance operation; It could possibly meet the requirements of protection regulations. Especially for oil and gas drilling, petroleum and chemical arena, coal and mining marketplace, flammable areas, explosive, extreme temperature, humidity, dust and other safe practices explosion-proof requirements conditions. It is also used in emergency situations, such as as emergency fire extinguishing.
There are wall-mounted type air flow pressure wash down pump and cart type shampoo down pump. The wheeled type is more popularly found in oil and gas drilling field, currently compact design and easy regarding movement. It can flush for any oil field shale shaker and other screen separation appliance, to avoid the screen through blocking. It can also do various other cleaning up jobsite at the computer site, for the vertical cutting dryer, the mud tank systems, the decanter centrifuges, etc .... The air powered engine type is especially well ideal for the offshore drilling machine hazardous areas.
It has several applications when used in oil and coal drilling field. The
The oxygen powered washer is specifically designed for hazardous environment. It could working at gas atmosphere and improves safety for cleaning works.

HDD machine made in China for sale

HDD（Horizontal directional drilling）machine is widely required by HDD contractors, civil engineering works, construction works, pipeline crossing, etc. Except for the international brand HDD machines, like Vermeer, Ditch Witch, TT& Prime, Herrenknecht, etc, HDD machines made in China has been more and more popular in the world, especially under the world’s economy became quite slow, all of the HDD contractors need to lower their drilling cost because the service cost given by their client become lower, it is impossible to win the project under the previous cost.

The HDD rig made in China with competitive price, fast delivery time, good quality and performance and flexible payment term, that is the reason why more and more international clients choose to visit China HDD machine manufacturers, one reason is to check the machine , the other reason is to train their engineers or operators.

Here listed some of China HDD machine manufacturers, for more details and more supplier list, pls contact with GN solids control.

• Drillto
• Goodeng
• JULI
• XCMG
• HUANGHAIJIXIE

Together with the HDD machine, the client also need mud cleaning system for the HDD rig. GN solids control is the most professional mud cleaning system and drilling waste management system manufacturer in China, we had supplied mud cleaning system to over 60 countries in the world, like Australia, Indonesia, India, Oman, Kuwait, Singapore, Korea, Thailand, New Zealand, etc countries. We have standard design model for different model HDD machines, we have 200gpm, 300gpm, 500gpm, 800gpm, 1000gpm mud cleaning system for option, for 500gpm, we also have different configuration equipments for sale, different design with different storage capacity and transportation dimension, 500B model with 6m length mud tank, the feature is for smart compact design, 500G with 10m length mud tank, 500GL with 40ft container size mud tank.

If you need HDD machine and HDD mud recycling system, pls contact with GN solids control.

GN Solids Control equipment exporting to Africa market

GN Solids Control have lots of big clients from Africa, and in the past 3 years, we export lots of solids control equipment and drilling waste management equipment to the market. The high efficiency and good price equipment help the production in the market, and we build stable cooperation relationship with the clients there.

 

1) In year of 2014, we export 6 sets decanter centrifuge to Nigeria.

Nigeria is a good market for oil drilling in the past several years. The oil production capacity is ranking Number one in West Africa. As the higher price of US brand equipment, lots of drilling companies and oil service companies from Nigeria come to GN Solids Control to buy lots of solids control equipment. In 2014, we export 6 sets decanter centrifuges to Nigeria drilling company. The client bought 3 sets fixed speed centrifuge and 3 sets variable speed centrifuge. The match can make the work much flexible for barite recovery or for mud weight cuttings.

In same year, the clients also bought 2 container  shale shaker screen from GN Solids Control, replacement screen for Derrick shale shakers and replacement screen for Swaco Mongoose shakers.

 

2) In year of 2015, we export large quantity of decanter centrifuge to Algeria

Algeria is Arabic country with lots of land drilling rigs. Even the oil price is going down and going up slowly, Algeria still have some drilling rigs working every day. The client bought the centrifuge to work with 16 drilling rigs. Already one year past, the client is very happy with the working performance.

 

3) In year of 2016, we export large quantity of decanter centrifuge to Middle East

The ADCO end user accept GN Solids Control brand and accept to take some sets of decanter  centrifuge to trial. After they satisfy with the working performance, big order and more order will come to GN Solids Control.

High Quality Shaker Monitors, for Sale

When you talk about a brand inside oil and gas drilling solids control industry, the first China brand name happens into your mind is GN Solids Control. In fact , GN Solids Control is the make of Hebei GN Solids Control Co. LTD, which is not a new manufacturer with the longest record, but who has been creating very rapidly. In the beginning of its establishment, this company has set the aim as building the first solids control brand in The far east and to produce the around the globe top quality products.

GN Solids Control’s products cover mostly four fields:
1 . The regular products of GN Solids Control are solids control equipment and systems to get oil and gas drilling, including shale shaker, desander, desilter, along with solids control decanter centrifuge. And GN also has numerous pumps like centrifugal pump, submersible slurry pump, shear pump and etc . GN Solids Control has been providing complete solids control techniques for years.
2 . Drilling waste management systems and products. It is to meet the demands involving recent years for the environment safety requests per laws founded in many countries. It is also called absolutely nothing discharge system. GN will be the second to non-e producer in this field.
3. Shaker screens. Since GN is definitely leading supplier of shale shakers, in order to better control the shaker screen top quality, GN constructed a separate manufacturer for shaker screens, and a lot of client who had other brands shale shakers like Derrick, Swaco and NOV Brandt, these people source replacement shaker projection screens from GN.
4. GN never stops designing brand new equipment or improve the current equipment’s performance to fit for much more applications. Based on the rich expertise, GN has designed often the solidification unit, TDU system and dewatering unit, and people are becoming more and more popular.

Right now, in order to support the old clientele and meet new consumer to know GN better, GN now is providing a for sale task for shaker screens. For additional information, pls contact GN widely.

Mining centrifuge available in Chile

GN solids control has one device of mining decanter centrifuge for sale in Chile, welcome to experience of GN solids control to become more info and the price give. The special discount will probably be offered if you would like to purchase before May 1, 2016.
The model number of exploration decanter centrifuge is GNLW223 with 9 inch serving diameter, which has been widely used intended for mining industry in the past decades, the purpose to use the gold mining centrifuge is to reduce the normal water comsumption for diamond main drilling, re-use the waste materials water and reduce the cost, you also may meet the environmantal polices by less the drilling waste and less the damage for the earth. In some countries, is probably the best obligate to submit a proper drilling waste management solution before gettting the approval of the core drilling project, especally in mining or prospecting industry.

We have improved the actual centrifuge according to the feedback via our clients, the protection from the screw propeller used to be shielded by tungsten carbide combination spray welding, now it is just like the oil drilling decanter centirfuge GNLW363CG- protected by simply tungsten carbide tiles, which can be proved with longer operating life to protect the attach.
The solids discharge interface has been changed to special ceramics for better abrasive weight performance, you can replace less replacements to save your maintenance as well as cost. And the centrifuge serving collection box opening route has been changed for intuitive purpose.
The max rotator speed of GNLW223 mining or prospecting decanter centrifuge is up to 4500rpm, most of us also have 3800rpm for choice. The unit in Chile on sale is with 380v/ 50hz, a few phase electric motor and also control panel, if you do not require the electric motor and want to intall your own hydraulic commute system, it is acceptable to take out the motor and VFD control panel.

Meet GN Solids Control @ MIOGE 2016

MIOGE is coming in the following month, which is one of the largest necessary oil show in the world. GN Solids Control attends the oil demonstrate each year in past your five years, meet lots of fresh client via the exhibit, including oil drilling firms, mud service companies, essential oil tools trading and provider companies, solids control provider companies etc . Welcome to GN Solids Control booth in MIOGE to talk more win win business.
Booth No .: Pavilion-2, Hall-5, C 40
Demonstrate Time: April 18-21, 2016
Show Location: EXPOCENTER, Moscow, Russia
Appointment email: sales@gnsolidscontrol. com
Note: Pls carry out send us email or maybe call us in advance to let you know if you are coming to the booth at MIOGE. And that we can do necessary preparations to your coming.

Below our Moscow office contact for guide:
Location: Г. Москва, Радонежского Сергия Ул. д. only two
Phone: +7-8(925)304 25 60 to 70 +7- 8(968)950 31 1949
Website:
The next chapters are some information about the solids control & drilling waste management equipment coming to the particular booth for exhibition.
1) Drilling waste management usable cuttings dryer GNCD930D
GN vertical cuttings dryer is equivalent to PEOPLE brand vertical dryers, we are growing market each year to guide more clients in drilling waste management. The up and down cuttings dryer can deal with the drilling cuttings released from shakers line and also the solids with Essential oil less than 5%. After remedy, the cuttings can be very easily to collect, transport or additional treatment.

2) Drilling waste management & solids control decanter centrifuge GNLW363CG
GNLW363CG decanter centrifuge with max. dish speed 3900RPM can be utilized in many different areas, from minimal speed function to central speed to high speed; distinct speed range can individual different size particles to achieve different purpose.
GNLW363CG predetermined speed centrifuge, the offered speed 2200rpm /2700rpm suggestions 3200rpm can be reached by transforming belt pulley, much great price and easy operation.
GNLW363CG-VFD variable speed centrifuge, rate can be changed stepless through 0 to 3200rpm, cost are higher, but the speed alter is much faster than predetermined speed centrifuge.
1600RPM in order to 2000RPM bowl speed can be employed for barite recovery
2200RPM to 2700RPM bowl velocity can be used for mud fat cutting
2800RPM to 3200RPM bowl speed can be used with regard to fine solids removal, drilling waste management

3) Solids Control Mud Cleaner GNZJ594E-3S16N
GN 4 panel mud cleaner is equivalent to US brand mud cleaner, replacement to Swaco Mongoose mud cleaner. The particular shale shaker screen is also alternative to Swaco Mongoose composite materials screens. The total treating potential can reach to 1500GPM with 3 desander cones & 16 desilter cones.
Looking forward to meet you there for much more business talking, Thanks for your examining.

GNWS series desilter

GNWS series desilter is mainly composed of drilling fluid distribution manifold, cyclone or along the bottom flow sieve, etc, desilter is used for drilling fluid mud mixing  system of level 3 solids control equipment.
Desilter’s separation capacity is high, particle size range is extensive; desilter’s bottom show with pressurized umbrella "wet bottom" row sand make the separation of the particles in the discharge quickly, reduce the probability of bottom discharge port jam; Advanced small two deck screen shale shaker with large quantity, low noise, screen mesh long life; Symmetrical mechanism makes the liquid in desilter distribution is reasonable, stable work.
Common desilter is the 4 "hydrocyclone separation is mainly used for drilling fluid in the particle size of solid phased particles for 15-47 u m. GNWS series desilter according to the size of the customer request on processing, choose several groups of cyclone desilter. GN solids control desilter is widely used in oil drilling, horizontal directional drilling mud separation, etc.

Installation :
1. the mud cleaner should be installed after the desanding cleaner, namely the no. 2 tank tail, smooth base must be placed.
2. In addition to the mud cleaner connected to other equipment import and export pipeline using soft pipeline, and minimize the length and bend.

3. The screen tensioning should be proper, after the tension of screen should level off without a wrinkle.
   Daily maintenance :
   1. The new mud cleaner used for the first time or after the move before first use must remove the screen box lock bolt.
   2. when Cyclone stopped for a long time, please clean with clear water cycle, prevent dry sand inside the cyclone deposited.
   3. Vibration motor should be greased after 1500 ~ 2500 hours each time, each bearing oil quantity is 5 ~ 10 ml.
   4. After downtime should clean screens, in case sand became dry, cannot be used next time.

Shaker and mud cleaner export in order to Middle East

As the Tiongkok leading solids control gear brand, GN Solids Control export lots of solids control equipment to all over the world, specifically to Africa countries as well as Middle East countries. Not too long ago, we just finish a couple sets 500gpm mud cleaning system for one old customers from Middle East. Many people bought one sets 500gpm mud cleaning system in 2013 and are very satisfied with the running performance and high quality devices. And now they have more plans and repeat order to you.

1) GNZS703E-HB Shale shaker for Middle East customer
The shale shaker is usually GN mature model shaker which have been working for the drilling industry over 5 many years. The stable working overall performance and less maintenance get great reputation from clients. GNZS703E-HB shaker is shale shaker with 3 panel shaker screen, carbon steel framework shaker screen for lengthier life use. The shaker screen is installed through rubber wedge for quick installation and fast disassembly. Other spare parts is the plastic seal.

2) GNZS703J-1S8N mud cleaner for Middle Eastern side client
The mud cleaner is combination of shale shaker, desander cones and desilter cones. The desander cones and desilter cones will probably be fixed on one steel structure which can be fast assemble or even disassemble from the shaker within.
The mud cleaner will need two sets centrifugal pump for feeding, our centrifugal pump is equivalent or perhaps replacement for NOV brandt assignment pump.

3) Except for the actual shaker and mud cleaner, the client also bought three sets of vertical slurry pump to transfer the particular waste mud in hole to shale shaker. The actual vertical submersible slurry pump is better for waste mud with big particles, far more anti-corrosive.

Except for HDD venture, underground tunneling project, exploration project, diamond drilling, central drilling, GN solids control equipment is mostly used for necessary oil & gas drilling industry. GN can offer complete brand of solids control system to fulfill the different requirement from diverse clients, including 500gpm mud cleaning system, 1000gpm mud cleaning system, 1500gpm mud cleaning system and so on

GN Mud treatment system for Italy service company

GN Solids Control have supported Russia sector many years. In the past 3-5 decades, we invite lots of Italy drilling company, oil service provider, mud engineer service company as well as the dealer for Derrick and Swaco to GN factory. We present GN Solids Control equipment directly to them and talk with them in regards to the improvements. Based on the quite a few significant meetings, we build the rich experience in solids control and drilling waste management for Russia market place. Slowly and stable, we all export more and more solids control equipment to Russia. The consumer satisfactory rate can arrive at above 90%.

Recently, we have another order from Russian federation oil service company. This is the final repeat order for the same drilling waste management system. Often the clients really appreciate the gift basket type mud cuttings cure system and the workers along with equipment can be protected well on the container to avoid often the cold weather. And the drilling waste management container with entrances, windows, top openings as well as down opening, all these style make the container system a lot user friendly.

The container interior include 3 important devices: vertical cuttings dryer, bolt pump and decanter centrifuge. The vertical cuttings dryer is to separate the cuttings from the waste sludge. Typically the oil on cuttings is usually about 3% in solids discharge. The liquid after that will go to decanter centrifuge intended for next step treatment via mess shear pump. The screw pump is Germany brand Netzsch pump which with excellent performance when feeding typically the centrifuge. GN vertical cuttings dryer is equivalent to or alternative to USA Brand cuttings dryer. We have lots of clients transfer from USA brand dryer to GN solids control brand for the reason that lower purchase price, stable operating performance and lower replacements costs.

Decanter centrifuge is critical for this container type drilling waste management system. The particular GN 3TH Generation centrifuge can treatment more than <20% mud compared with last variation. With improvements points, GN centrifuge is replacement for Alfa Laval centrifuge. We likewise have clients comparing the working efficiency of GN solids control centrifuge and also Alfa Laval…. Almost very same in working speed in addition to solids volume separated.